- Home
- >
- Glass Reactors
- >
- Jacketed Glass Reactors
- >
- EHANOL EXTRACTION AND WINTERIZATION REACTOR SYSTEM
EHANOL EXTRACTION AND WINTERIZATION REACTOR SYSTEM
20L Ethanol Reactor Base System 20 liter jacketed reactor base system designed specifically to operate at the extremely low temperatures required to perform ethanol extraction and winterization. Contact our technical support staff to choose a chiller with the appropriate connections, explosion proof motor and any other accessories needed
20L Ethanol Reactor Base System 20 liter jacketed reactor base system designed specifically to operate at the extremely low temperatures required to perform ethanol extraction and winterization. Contact our technical support staff to choose a chiller with the appropriate connections, explosion proof motor and any other accessories needed
Be the first to review “EHANOL EXTRACTION AND WINTERIZATION REACTOR SYSTEM” Cancel reply
Related Products
Universal open frame stand design allows for maximum clearance and access to the ports on the head. To allow for scale up, the frame has been designed to be fitted with vessels from 10L to 200L in size. For versatility, our systems have been designed with a working temperature range of ambient through 200˚C, and wetted surfaces of borosilicate glass and PTFE.
Unjacketed Kilo Systems include:
- • 4 Post Reactor Stand
- • Unjacketed Spherical Flask
- • Head, Coupling and O-Rings
- • Agitator, Stir Shaft, Bearing & Collar
- • Lid and Clamp
- • Bottom Drain Valve
- • Heating Mantle
- • Temperature Controller with Probe
- • Cooling/Heating Coil (not pictured)
REACTION SYSTEM #50 Ace-Thred, 450W
Complete reaction assembly with all parts needed for immediate operation. Utilizes an internally threaded connection in place of the ground glass joint. Bushing and FETFE O‑Ring form a compression type seal with immersion well. Well has removable inner cooling tube. Reactor has (1) 14/20 angled joint for sparger tube, (1) 24/40 vertical joint for condenser, and (1) #7 Ace-Thred for thermometer. Volume indicated is total volume. Actual working volume is approximately 40-50% of total.
REACTION SYSTEM Standard Taper, 450W
Complete reaction assembly with all parts needed for immediate operation. Borosilicate glass reactor has a 60/40 center joint, (1) 14/20 angled joint for sparger tube, (1) 24/40 vertical joint for condenser, and (1) #7 Ace-Thred joint to accommodate thermometer. Volumes indicated are total volumes. Volume in reactive area of lamp is 40-50% of the total volume.
LAMP Medium Pressure Medium pressure, quartz, mercury-vapor lamp. For use in all listed immersion wells. 61cm PTFE covered lead wires, fitted with pin type connectors and 6’ cord for connecting to power supply, permit lowering lamp into well for vertical operation. Of total energy radiated, approximately 40-48% is in the ultraviolet portion of the spectrum, 40-43% in the visible, the balance in the infrared.
PHOTOBIOLOGICAL-OXIDATION APPARATUS 1200W, U.V., Flow-Thru
Modified version of 7900 Apparatus. Sample tubes have been replaced with a flow-thru quartz or borosilicate coil for continuous radiation of small (as little as 175mL) or large samples. Coil is available with cooling jacket for slow flow rates or without jacket when heating of sample is not a concern because of the higher flow rate.
Apparatus consists of a cylindrical lamp housing, medium pressure 1200 watt photochemical lamp, quartz or borosilicate glass coil (with or without jacket), and power supply. Access door is provided for set-up, inspection and repairs only — for your safety, do not use this door while the unit is in operation.
A cooling fan is located at bottom of housing for air movement. Lamp power supply includes a manual or automatic twelve-hour timer selector for programming exposure time. Available in 220v, 60Hz or 230v, 50Hz. Lamp housing measures 12” wide x 20” deep x 36” high, and weighs 75 lbs. Power supply measures 11” wide x 18” deep x 11” high, and weighs approximately 75 lbs. Coil is 12.7mm O.D. x 8.0mm (5/16”) I.D. with 1/2” Swagelok ends, 16 ±1 turns with approximate capacity of 175mL, maximum flow rate of 10L/min.
GLASS FILTER REACTORS AND PRESSURE REACTORS 35PSI JACKETED FOR FILTRATION ACE
Rugged, heavy wall reactor with 60mm, 100mm, or 150mm Duran® style top flange with O‑Ring groove at top, for connection to 6527, 6528, or 6529 heads, with 6517 quick-release clamp. Bottom has an Ace‑Thred (internal glass thread) for installing 5838-83 (#50) or 5857-86 (#80) bottom adapter with filter support and drain valve. Head has three 24/40 joints on 60mm size; four 24/40 joints on 100mm and 150mm sizes. Major Design Features
- – 100mL to 6000mL standard
- – Unjacketed or Jacketed
- -All inert materials
- -Reactions at ambient or pressure conditions
- -Filtering by vacuum and/or pressure
- -Removable/changeable filters, poly screen or glass, wide choice of porosities
- -Mechanical agitation
- -Inert bottom drain valve
- -Easy assembly/disassembly for cleaning
Universal open frame stand design allows for maximum clearance and access to the ports on the head. To allow for scale up, the frame has been designed to be fitted with vessels from 10L to 200L in size. For versatility, our systems have been designed with a working temperature range of ambient through 200˚C, and wetted surfaces of borosilicate glass and PTFE.
Unjacketed Kilo Systems include:
• Universal Reactor Stand
• Unjacketed Flask
• Head, Coupling and O-Rings
• Agitator, Stir Shaft, Bearing & Collar
• Lid and Clamp
• Bottom Drain Valve
• Heating Mantle
• Temperature Controller with Probe
• Cooling/Heating Coil (not picture
Reviews